高分六号宽幅相机在轨几何定标及精度验证   总被引：1，自引：0，他引：1  

王密  郭贝贝  龙小祥  薛麟  程宇峰  金淑英  周晓 《测绘学报》2020,49(2):171-180

高分六号宽幅相机能够实现单相机成像幅宽优于800 km,对大尺度地表观测和环境监测具有独特优势。在轨几何定标是光学遥感卫星几何处理的关键环节,直接影响影像的几何质量。本文充分考虑高分六号宽幅相机超大视场的畸变特性以及多谱段的成像特点,提出宽幅相机在轨几何定标方法,采用基于探元指向角的几何定标模型补偿宽幅相机系统误差,通过绝对定标和相对定标方法联合估计各波段的内外定标参数。利用Landsat 8影像、资源三号DSM为参考数据,对宽幅相机进行绝对定标处理,再利用ASTER GDEM为参考数据进行相对定标处理,其几何定标结果表明,高分六号宽幅影像绝对定位精度在3像素左右,内部几何精度能稳定在1像素,且波段间配准精度在0.3像素以内,表明在轨几何定标后高分六号宽幅影像几何质量得到了明显的提升。  相似文献   

基于已知特征平面的移动测量系统安置参数检校     

张顺  张帆  李珂 《北京测绘》2020,(3):437-442

安置误差是影响移动测量系统激光点云精度的主要因素之一。当激光点云中存在特征平面时,安置误差会导致该平面与真实平面之间产生较大的偏差,如果存在多个空间上位置关系较好的特征平面,就能够全面反映出系统的安置误差。本文以此为依据,给出了一种基于已知特征平面的移动测量系统安置参数检校方法,并详细阐述了检校场的布设、数据获取及处理等内容。实验证明,该方法是一种简单、可靠的检校方法,具有较高的实用性。  相似文献   

时域反射仪（TDR）测定土壤含水量标定曲线评价与方案推荐     

徐玲玲  高彩虹  王佳铭  金会军  吴青柏  DYCK Miles  何海龙 《冰川冻土》2020,42(1):265-275

时域反射仪（Time Domain Reflectometry）可用于室内和田间快速、 准确、 自动测定土壤含水量， 是目前应用最广泛的土壤含水量测定方法之一。适宜的土壤含水量标定曲线（即土壤表观介电常数和土壤含水量之间的关系）是TDR准确测定土壤含水量的关键。目前文献中存在大量的土壤含水量标定曲线， 但尚未有研究对这些标定曲线进行系统的验证和分析评价。因此， 它们的准确性和适用范围尚不明晰， 严重影响到与土壤含水量测定相关的研究。通过查阅大量国内外文献， 收集整理了一系列土壤含水量标定曲线的经验公式（19个）和半经验半物理模型（5个）， 并利用大量的文献实测数据对其进行综合评价。同时运用均方根差（RMSE）， 平均误差（AD）， 纳什效率系数（NSE）等三个指标对比分析和评价这些标定曲线的准确性和可靠性。研究结果表明： 经验公式中Topp、 Roth（1992）2、 Jacobosen、 Yoshikawa2、 Alharathi模型和半经验模型中Malicki1公式及其修订模型综合性能较好。研究成果可为利用TDR准确测定土壤含水量及土壤含水量标定曲线的选择提供参考和指导。  相似文献   

Calibration method affects the measured δ2H and δ18O in soil water by direct H2Oliquid–H2Ovapour equilibration with laser spectroscopy     

Hongxiu Wang  Bingcheng Si  Dyan Pratt  Han Li  Xiaojun Ma 《水文研究》2020,34(2):506-516

The direct H₂O_liquid–H₂O_vapour equilibration method utilizing laser spectroscopy (DVE-LS) is a way to measure soil pore water stable isotopes. Various equilibration times and calibration methods have been used in DVE-LS. Yet little is known about their effects on the accuracy of the obtained isotope values. The objective of this study was to evaluate how equilibration time and calibration methods affect the accuracy of DVE-LS. We did both spiking and field soil experiments. For the spiking experiment, we applied DVE-LS to four soils of different textures, each of which was subjected to five water contents and six equilibration times. For the field soil experiment, we applied three calibration methods for DVE-LS to two field soil profiles, and the results were compared with cryogenic vacuum distillation (CVD)-LS. Results showed that DVE-LS demonstrated higher δ²H and δ¹⁸O as equilibration time increased, but 12 to 24 hr could be used as optimal equilibration time. For field soil samples, DVE-LS with liquid waters as standards led to significantly higher δ²H and δ¹⁸O than CVD-LS, with root mean square error (RMSE) of 8.06‰ for δ²H and 0.98‰ for δ¹⁸O. Calibration with soil texture reduced RMSE to 3.53‰ and 0.72‰ for δ²H and δ¹⁸O, respectively. Further, calibration with both soil texture and water content decreased RMSE to 3.10‰ for δ²H and 0.73‰ for δ¹⁸O. Our findings conclude that the calibration method applied may affect the measured soil water isotope values from DVE-LS.  相似文献   

Soil resistances for laterally loaded rigid piles in multi-layered elastic soil     

Bipin K. Gupta 《Geomechanics and Geoengineering》2020,15(1):10-28

ABSTRACT

Short stubby piles like monopiles and large diameter drilled shafts undergo rigid body translation and rotation when subjected to a lateral force and/or a moment at the head. A method of analysis for these piles embedded in multi-layered elastic soil is developed using the variational principles of mechanics. Using this analysis, the soil resistance against pile movement can be rigorously related to the soil elastic constants, and the pile head displacement and rotation can be quickly calculated. The equilibrium equations for pile and soil displacements are obtained using the principle of virtual work and solved using an iterative algorithm. Pile responses obtained from the analysis match well with those obtained from three-dimensional finite element analyses in which the same inputs of loads, geometry, and material properties are given. Based on the new analysis, fitted equations for soil resistance parameters are developed, which can be used to directly calculate the pile head displacement and rotation without the use of the iterative algorithm. Numerical examples are provided that demonstrate how the method can be used to analyse practical problems.  相似文献   

低压密闭消解-电感耦合等离子体发射光谱法测定地质样品中的硼     

杜宝华  盛迪波  罗志翔  王全 《岩矿测试》2020,39(5):690-698

采用酸溶-电感耦合等离子体发射光谱法(ICP-OES)测定地质样品中的全硼量,关键环节在于如何防止样品消解过程中硼元素的损失,降低测量过程中的基体干扰、光谱干扰和记忆效应。基于以上问题,本文采用氢氟酸-硝酸-高氯酸-磷酸在低压密闭溶样罐中消解样品,溶出的硼元素与少量磷酸充分络合,防止硼的挥发损失;以基体及主成分浓度与样品相类似的地质类固体标准物质绘制标准曲线做线性校准,有效匹配和降低样品的基体干扰;采用仪器自带的操作软件,观察分析谱线附近是否存在其他元素的干扰,来确定背景扣除最佳的位置及宽度,降低ICP-OES测量中的光谱干扰;以10%的王水作为进样系统的冲洗液,有效消减测量过程中的记忆效应。当稀释因子为200时,方法的检出限(3SD)为1.2μg/g,定量限(10SD)为4.0μg/g;用岩石、土壤及水系沉积物国家一级标准物质对精密度及准确度进行分析验证,11次测定相对标准偏差为1.8%～7.9%,相对误差为-3.6%～6.3%;以外检分析结果为参考,对硼含量在定量限以上的样品测定,相对误差为-9.3%～12.5%。  相似文献   

粒子加速器中高精度丝线绝对位置测量技术研究   总被引：1，自引：0，他引：1  

梁静  罗明成  王铜  董岚  罗涛  柯志勇  王小龙 《测绘通报》2019,(9):44-50

粒子加速器中采用振动线技术进行共架单元上多块磁铁的高精度预准直，需要将振动线代表的磁中心引出进行共架单元之间的相对准直。为了获取以振动线为代表的丝线高精度空间绝对位置，本文对采用近景摄影测量技术进行点、线位置求解的方法进行了研究。利用单相机多站位的方法进行拍摄，通过标定板提供的高精度控制点坐标，采用自标定光束法平差对相机进行标定，并提出将空间直线离散成空间2点进行直线整体精确求解。对标定板上由2点组成的模拟直线进行测量验证，并与标定板提供的理论值进行对比，结果显示空间直线位置获取精度优于5 μm。这表明了本文理论和方法的正确性，为进一步研究丝线高精度空间绝对位置测量打下了基础。  相似文献   

基于投影变换的线阵旋转扫描相机标定方法     

苏琳  巫兆聪  闫钊  王鹏 《测绘通报》2019,(4):96-98,102

针对线阵旋转扫描相机标定数据难以获取及模型解算不稳定的问题，提出了一种基于投影变换的线阵旋转扫描相机标定方法。首先构建了一种新的线阵旋转扫描相机成像模型，该模型可以根据相机旋转平台参数、线阵旋转扫描相机成像平面与其切平面的位置关系将旋转扫描图像投影为框幅式图像；然后根据构建出的成像模型，采用直接线性变换法和非线性优化方法进行相机标定和参数优化。试验结果表明，此方法简单易行，具有较高的精度。  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

基于一维综合孔径微波辐射计的海面温度反演研究   总被引：1，自引：0，他引：1  

艾未华  冯梦延  陈冠宇  陆文 《海洋学报(英文版)》2020,42(5):115-122

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.  相似文献